|
U-POL Top Stop Gold Multifunction polyester finishing filler suitable for a variety of surfaces including galvanised metals. Extra smooth spreading and pinhole free to provide the perfect substrate for painting TOPSTOP GOLD polyester filler is a two component multifunctional paste used for filling small holes and imperfections in most substrates prior to being over-painted. TOPSTOP GOLD has been specially formulated for the professional user. It is a very soft, smooth paste and can be easily spread in thin layers to provide the perfect surface for painting. Multi-function polyester finishing filler Suitable for a variety of substrates including galvanised metals Ideal for use prior to painting. Leaves a pinhole free finish to provide the perfect substrate for painting Trade Discounts Available
|
Top Stop Gold
Mixing ratio: 100parts filler to 2parts hardener
Pot life: 4-5minutes once mixed with hardener at 20°c
Sandable after: 15-20 minutes 20°c
Top Stop Gold Can be used on pretty much on any surface of a vehicle from bare metal to Glass fibre panels.
Prepare the surface by removing any rust, dirt or grease.
Next using sand paper or a DA sander rough up the area to add a key to help the filler adhere.
This is a 2 component filler. Mix 100parts filler to 2parts hardener (Golf Ball of filler to a Pea of hardener)
Once mixed you have a round 4-5minutes to apply the filler before it starts to set.
Try apply the filler as smooth as you can as the will save time when sanding.
If the dent or hole is quite deep you may need to apply 2 or even 3 coats to build up the layers.
Within 15-20 minutes the filler will be dry enough to sand.
For best results do not use anything less then an 80grit for shaping and smoothing the filler
Goggles and a dust mask must be used. Data sheets are available on request.