|
U-Pol Fibral U-POL FIBRAL is a sandable glass fibre repair paste. Designed with specialist applications in mind i.e. glass fibre cars, caravans, boats, baths etc. Fibral is reinforced with glass fibre. Used for bridging holes in metals and plastics, and in glass fibre surfaces. It is sandable after twenty minutes and is strong enough to resist vibrations. Fibral polyester glass-fibre filler is a two-component chemical paste used for the bridging of holes and rust in surfaces such as bare steel. Forms a very hard durable surface that is easily covered with standard polyester filler or can be over-painted directly with topcoat. Supplied in an easy squeeze bag together with the appropriate hardener. Trade Discounts Available |
U-Pol Fibral
Mixing ratio: 100parts filler to 2parts hardener
Pot life: 4-5minutes once mixed with hardener at 20°c
Sandable after: 15-20 minutes 20°c
U-Pol Fibral Can be used on pretty much any surface of a vehicle from bare metal to Glass fibre panels.
Prepare the surface by removing any rust, dirt or grease.
Next using sand paper or a DA sander rough up the area to add a key to help the filler adhere.
This is a 2 component filler. Mix 100parts filler to 2parts hardener (Golf Ball of filler to a Pea of hardener)
Once mixed you have a round 4-5minutes to apply the filler before it starts to set.
Try apply the filler as smooth as you can as the will save time when sanding.
If the dent or hole is quite deep you may need to apply 2 or even 3 coats to build up the layers.
Within 15-20 minutes the filler will be dry enough to sand.
For best results do not use anything less then an 80grit for shaping and smoothing the filler
Goggles and a dust mask must be used. Data sheets are available on request.