|
Tetrosyl ColorCure Aluminium Bodyfiller The Color Cure range of professional lightweight body fillers from Tetrosyl are ideal for all types of repairs from minor imperfections to larger dents. Each filler has been carefully tinted to ensure correct product usage the aluminium one has a silver tint to it. It forms a strong, hard repair. Color cure aluminium body filler is durable and retains its adhesion over time. Ideal to apply onto steel, coated steel, aluminium and other metals as a base layer before priming or over coating with conventional body filler. Durable finish Over coatable with conventional body fillers Recommended for all metal repairs. |
Tetrosyl ColorCure Aluminium Bodyfiller
Mixing ratio: 100parts filler to 2parts hardener
Pot life: 4-5minutes once mixed with hardener at 20°c
Sandable after: 15-20 minutes 20°c
Tetrosyl ColorCure Aluminium Bodyfiller Can be used on pretty much any surface of a vehicle from bare metal to Glass fibre panels.
Prepare the surface by removing any rust, dirt or grease.
Next using sand paper or a DA sander rough up the area to add a key to help the filler adhere.
This is a 2 component filler. Mix 100parts filler to 2parts hardener (Golf Ball of filler to a Pea of hardener)
Once mixed you have a round 4-5minutes to apply the filler before it starts to set.
Try apply the filler as smooth as you can as the will save time when sanding.
If the dent or hole is quite deep you may need to apply 2 or even 3 coats to build up the layers.
Within 15-20 minutes the filler will be dry enough to sand.
For best results do not use anything less then an 80grit for shaping and smoothing the filler
Goggles and a dust mask must be used. Data sheets are available on request.